71
Using scene files
You can store various scene file setting items for
different shooting conditions within a scene file.
Different scene files can be saved separately for
AVCHD mode and DV mode.
By changing scene files, you can recall necessary
settings.
The following scene files are saved as the factory
default settings.
Scene 1: Settings suited to standard shooting.
Scene 2: Settings suited to shooting images with
modulated color hues and contrast.
Loading scene files
1
Set the POWER switch to ON.
(Page 30 of Vol.1)
The CAMERA lamp lights red.
2
Press the MENU button.
3
Select SCENE1 or SCENE2 for the FILE
SELECT item in the setting menu SCENE
FILE screen, and then press the ENTER
button.
4
Select LOAD for the LOAD/SAVE/INIT item in
the setting menu SCENE FILE screen, and
then press the ENTER button.
The settings stored on the scene file will be
enabled.
5
Select YES and press the ENTER button
when the confirmation message appears.
SCENE1 LOADED TURN POWER OFF”
appears on the screen.
The SCENE1 setting is applied when you
restart the camera.
•
•
•
Simply changing the scene file in FILE
SELECT will not change the settings. Be sure
to perform LOAD with LOAD/SAVE/INIT.
As current setting values will be changed when
you perform LOAD, be sure to save them if
necessary.
•
Setting and saving scene files
You can set the items found in the setting menu
SCENE FILE screen. (Page 101)
You can save changed settings as SCENE1 or
SCENE2.
1
Set the POWER switch to ON.
(Page 30 of Vol.1)
The CAMERA lamp lights red.
2
Press the MENU button.
3
Set the items found in the setting menu
SCENE FILE screen.
4
Select SCENE1 or SCENE2 for the FILE
SELECT item in the setting menu SCENE
FILE screen, and then press the ENTER
button.
5
Select SAVE for the LOAD/SAVE/INIT item in
the setting menu SCENE FILE screen, and
then press the ENTER button.
6
Select YES and press the ENTER button
when the confirmation message appears.
The scene file selected in the FILE SELECT
item will be overwritten. To cancel save,
select NO and press the ENTER button.
You cannot restore scene files that have
been overwritten.
•
•
•
To Next Page
Loading...
