- 100 -
≥ Register [SCENE FILE] to a USER button. (l 84)
You can save the scene file settings to the SD card or load them from the SD card to this unit.
∫ Saving scene file settings
1 Press USER button or touch USER button icon in the recording screen.
2 Touch [SAVE].
3 Touch the name of the scene file.
≥ All scene number settings ([F1:] to [F6:]) will be saved.
≥ Up to 8 files can be saved.
≥ If you have touched the name of the existing scene file, touch [YES] to overwrite it.
4 Touch [EXIT] to complete the setting.
∫ Assigning saved scene files to scene numbers
1 Press USER button or touch USER button icon in the recording screen.
2 Touch [LOAD].
3 Touch the name of the scene file you want to load.
4 Touch / to select the scene number to which you want to assign the
scene file.
5 Touch [RETURN].
≥ When you touch [YES], Settings
*
of the scene number you have selected will be loaded and then
assigned to the corresponding scene number in [FILE SELECT].
* The title of the scene number will also be loaded.
≥ If you select [ALL], settings of all scene numbers will be loaded.
6 Touch [EXIT] to complete the setting.
≥ You can also access this function by selecting menu items.
[SCENE FILE] # [LOAD/SAVE] # [LOAD] or [SAVE]
≥ Register [AUTO REC] to a USER button. (l 84)
This enables/disables a function that controls recording performed with an external device
(recorder, etc.) connected to this unit.
∫ If using
1 Select the appropriate option in the [OUTPUT SEL] menu.
≥ Select the option that corresponds to the terminal to which the external device is connected.
2 Select the [REMOTE REC] menu.
[SCENE FILE]
[AUTO REC]
: [OUTPUT SETUP] # [OUTPUT SEL] #[HDMI] or [SDI]
: [OUTPUT SETUP] # [REMOTE REC] # [ON]
AG-UX180ED(DVQP1171ZA)_E.book 100 ページ ２０１６年１１月２８日 月曜日 午前１１時３２分
To Next Page
Loading...
