- 101 -
3 Select the [REMOTE REC LINK] menu.
4 (When the external device is connected to the HDMI OUT terminal)
Select the [HDMI TC OUTPUT] menu.
5 Press USER button or touch USER button icon in the recording screen.
≥ This will display or and send a signal to the external device instructing it to start
recording.
≥ To stop recording to the external device, press the applicable USER button or touch the
applicable USER button icon again. This will display or and send a signal to the
external device instructing it to stop recording.
≥ When the external device is connected to the SDI OUT terminal / is displayed.
≥ When the external device is connected to the HDMI OUT terminal, / is displayed.
∫ If using
1 Select the [REMOTE REC] menu.
2 Select the [REMOTE REC LINK] menu.
3 Select the [HDMI TC OUTPUT] menu.
4 Press USER button or touch USER button icon in the recording screen.
≥ This will display and send a signal to the external device instructing it to start recording.
≥ To stop recording to the external device, press the applicable USER button or touch the
applicable USER button icon again. This will display and send a signal to the external
device instructing it to stop recording.
≥ (If using )
It is not possible to control recording performed with an external device connected to the
SDI OUT terminal in the following cases:
j When [REC FORMAT] is set to [SA 480/59.94i] or [SA 576/50.00i] (l 165)
j When [RESOLUTION] is set to [DOWN CONV.] (l 132)
: [OUTPUT SETUP] # [REMOTE REC LINK] # [OFF]
: [OUTPUT SETUP] # [HDMI TC OUTPUT] # [ON]
: [OUTPUT SETUP] # [REMOTE REC] # [ON]
: [OUTPUT SETUP] # [REMOTE REC LINK] # [OFF]
: [OUTPUT SETUP] # [HDMI TC OUTPUT] # [ON]
AG-UX180
AG-UX180ED(DVQP1171ZA)_E.book 101 ページ ２０１６年１１月２８日 月曜日 午前１１時３２分
To Next Page
Loading...
