5
Features
(continued)
Multi-function input/output interfaces
• Analog input/output
Component (Y, PB, PR) and composite and S1-VIDEO signal input and output connectors
are provided.
• Digital audio input/output
AES/EBU audio BNC input and output connectors are provided.
• Serial digital input/output
Serial digital (SMPTE 259M-C, 272M-C) input/output is possible when the optional compo-
nent serial interface board (AJ-YA455P) is used.
• IEEE1394 digital input/output
Signals can be input and output using the IEEE1394 interface if the digital video interface
board (AJ-YAD455P, optional accessory) is used.
• 9-pin (RS-422A)/RS-232C remote
The standard 9-pin serial (RS-422A) connector or RS-232C connector is used.
2-channel high-sound-quality digital audio
Sound can be edited separately for two channels, and channel mixing capabilities are also
available. One channel is provided for the analog cue track.
Information selected from audio CH1 and CH2 can be recorded in the cue track memory.
(Set at the set up menu.)
• Cue track input and output connectors are not provided.
Automatic editing functions from the external controller
Both assemble and insert editing can be performed using an external controller (but only
when DVCPRO cassettes are used).
Menu-driven setup
The setup settings, which are conducted prior to operating the unit, are performed while
viewing the setup menus either on the unit display or TV monitor.
To Next Page
Loading...
