EasyManua.ls Logo

Panasonic AJ-LT85P - Page 32

Panasonic AJ-LT85P
76 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
VIDEO
Item Setting
Description of setting
No. Item No. Item
600 INPUT C 0000 B/W
KILL 0001 AUTO ™™
601 OUT 0000 N-VF
VSYNC 0001 VF
602 V-MUTE 0000 N-MUTE
SEL 0001 LOW_RF
™™
603 CC (F1) 0000 BLANK
BLANK 0001 THRU ™™
604 CC (F2) 0000 BLANK
BLANK 0001 THRU ™™
605 FREEZE 0000 FIELD
SEL 0001 FRAME
™™
606 IN FRM 0000 FORCE
DET 0001 AUTO ™™
607 VIN SETUP 0000 THRU
0001 CUT ™™
608 VOUT SETUP 0000 THRU
0001 ADD ™™
The underlined number and item are the factory settings.
DETAILED DESCRIPTION OF SET-UP MENUS
32
This selects the color killer processing for the video input signals.
0: B/W processing is conducted forcibly.
1: Automatic processing is conducted.
This selects whether the internal sync signal is to be floated so that H is
aligned with the video output signal and V is aligned with the video input sig-
nal during EE.
0: Internal sync signal is not floated.
1: Internal sync signal is floated.
This selects where the video signals are to be muted during playback under
low RF conditions or when the servo lock is disengaged.
0: Signals are not muted.
1: Signals are muted.
This selects ON or OFF for the closed caption signal in the first field.
0: Signal is forcibly blanked.
1: Signal is not blanked.
This selects ON or OFF for the closed caption signal in the second field.
0: Signal is forcibly blanked.
1: Signal is not blanked.
This selects freeze for the still picture either during play or when operation is
transferred from play to stop.
0: Field freeze
1: Frame freeze
(Field freeze is set at all times when the laptop is in a mode other than the
one mentioned above.)
This selects frame detection for the input signals.
0: Frame detection is conducted at all times.
1: Frame detection is prohibited only with NON-STD signals.
This selects the 7.5% setup processing for the input composite signal.
0: The signal is recorded in its original form.
1: The signal is recorded with the 7.5% setup removed.
This selects the 7.5% setup processing for the output composite signal.
0: The signal is output in its original form.
1: The signal is output with the 7.5% setup added.
VV
TT
RR
12

Related product manuals