Recording format:
Recording tracks
Tape speed:
Recording time:
Tape used:
FF/REW time:
Editing accuracy:
Tape timer accuracy:
Servo lock time:
Ambient operating temperature:
Ambient operating humidity:
Dimensions:
Weight:
DVCPRO
Digital video
Time code; Recorded in sub-code area
Digital audio; 2 channels
Cue signal; 1 track
Control (CTL); 1 track
33.820 mm/sec.
126 min. (with AJ-P126LP tape)
66 min. (with AJ-P66MP tape)
1/4" thin magnetic layer metal tape
Less than 3.5 min. (with AJ-P126LP tape)
±0 frame (with time code)
±2 frame (per event when continuous CTL signal is used)
Less than 0.5 sec.
41°F to 104°F (5°C to 40°C)
10% to 85% (no condensation)
16-3/4" (W)×4-3/4" (H)×17-1/4" (D) (424×120×435 mm)
25.74 lb (11.7 kg)
DIGITAL
Sampling frequency:
Quantization:
Error correction:
Y; 13.5 MHz,
P
B/PR; 3.375 MHz
8 bits
Reed-Solomon codes
ANALOG COMPOSITE IN/OUT
Video band range:
DG:
DP:
Y/C delay:
K factor:
Analog composite input:
REF video input:
Analog composite output:
Monitor output:
Y; 30 Hz – 4.5 MHz (±1dB)
Less than 6%
Less than 4.5°
Less than 20 nsec
Less than 2%
BNC×2 (VTR1, VTR2), 75 ohms
BNC×2 (loop-through), 75 ohms, automatic
BNC×2 (VTR1, VTR2), 75 ohms
BNC×2 (VTR1, VTR2), 75 ohms, superimpose ON/OFF
VIDEO OUTPUT SIGNAL
Video gain:
Chroma gain:
Hue:
Set up:
H phase:
SC phase (COARSE):
SC phase (FINE):
More than ±3dB
More than ±3dB
More than ±25°
±10 IRE
More than ±1.5µsec
360°
90°
ANALOG COMPONENT OUT (during playback of standard recording tape)
Video band:
Analog component output:
Y; 30 Hz – 5.5 MHz (±1 dB)
P
B, PR; 30 Hz – 1.3 MHz (±1.5 dB)
BNC×6 (Y, P
B, PR, VTR1, VTR2), 75 ohms
Y connector is switched with the analog composite
output connector.
To Next Page
Loading...
