CONNECTIONS WITH THE AJ-YA752 AUDIO MEMORY UNIT
58
Sound recordings can be made without a time lag while playing back pictures (voice-over) when the AJ-YA752 audio memory
unit is used in combination with this unit.
• Cross-fade editing of sound is enabled by using this unit in combination with an audio mixer and audio memory unit.
• When recording cross-faded audio signals on CH2
(When recording these signals on CH1, reverse the CH1 and CH2 connections, and set OPTION MODE to AMU3.)
• For further details, refer to the operating instructions accompanying the AJ-YA752 audio memory unit.
<Note>
The audio memory unit cannot be used while the CONTROL switch is at the REMOTE or EXT VTR setting.
AJ-LT85 (VTR2)
Settings
OPERATION MODE: SEPARATE
V-MON/TC OUT: TC OUT 2
OPTION MODE: AMU1
TC MODE: I-REG
AJ-YA752
Setting
OPERATION MODE: VOICE OVER
MEMORY
IN
AUDIO IN EDL TC OUT
MEMORY
OUT RS-232C TC IN
MIC AMP
VTR 1 VTR 2
AUDIO
OUT
AUDIO
IN
CH2
AUDIO
IN
CH1
EDL TC OUT
THROUGH-
OUT
MEMORY
OUT
CH1
OUT
CH2
OUT
MEMORY
IN
RS-232C TC IN
MIXER
AJ-LT85
Settings
OPERATION MODE:
V-MON/TC OUT: TC OUT 2
OPTION MODE: AMU2
TC MODE: I-REG
To Next Page
Loading...
