Panasonic AK-HRP1005G

14 DETAIL
ヒチバチピ
ュユヵモリロ
パヒブ
パパパ
ュヵロ
ョンユヲハ
ラハュヵロ
ロユヷユロ
ヷハュヵロ
ロユヷユロ
ヤヰンリワヨ
ビチバチピ
ュユヵモリロ
パビ
パパ
ロユヷユロ
ュユヱユワュハ
ヨモリワドヌナ
ヨモリワドノナ
レワユユ
モヱユチロヷ
ピチバチピ
ュユヵモリロ
ュヵロ
ヴヸ
ヰワ
Item Setting details
DTL Sets the level of the overall detail effect (master detail).
This is enabled when [DTL SW] is “ON”.
CORING Sets the level of signal (including noise) that does not activate the detail effect.
This is enabled when [DTL SW] is “ON”.
H.DTL LEVEL Sets the intensity of the detail level in the horizontal direction.
This is enabled when [DTL SW] is “ON”.
V.DTL LEVEL Sets the intensity of the detail level in the vertical direction.
This is enabled when [DTL SW] is “ON”.
FREQ. Sets the thickness (boost frequency) of the detail.
This is enabled when [DTL SW] is “ON”.
LEVEL DEPEND. Compresses the detail of dark areas when detail of the brightness signal is emphasized. The larger the set-
ting value the more that detail of bright areas is compressed.
This is enabled when [DTL SW] is “ON”.
KNEE APE LV Sets the detail level of high-brightness areas (extremely bright areas).
This is enabled when [DTL SW] is “ON”.
GAIN(+) Sets the detail level of the plus direction (to make brighter).
This is enabled when [DTL SW] is “ON”.
GAIN(-) Sets the detail level of the minus direction (to make darker).
This is enabled when [DTL SW] is “ON”.
DTL SW Sets the detail function (video contour adjustment) to ON/OFF.
- 26 -
ROP Menu (during AJ-CX4000 Connection)