ROP Menu (during AJ-CX4000 Connection)
ROP menu list
When an AJ-CX4000 Memory Card Camera-Recorder is connected, the ROP menu will be as follows. For setting values related to the cam-
era, refer to the Operating Instructions for the camera.
For details on menu operations, refer to the following sections in the Operating Instructions.
“Displaying menus”
“Basic menu operations”
To perform menu operations, upgrade the version of the unit system to 4.82-00-0.00 or later.
The setting values of functions that are not supported are indicated as “－ ”.
01 SCENE
SCENE1
“SCENE1” (see page 13)
SCENE2
“SCENE2” (see page 13)
SCENE3
“SCENE3” (see page 13)
SCENE4
“SCENE4” (see page 13)
SCENE5
“SCENE5” (see page 13)
SCENE6
“SCENE6” (see page 13)
02 SHUTTER SPEED
SHUTTER
“SHUTTER” (see page 14)
SPEED MODE
“SPEED MODE” (see page 14)
SYNC TYPE
“SYNC TYPE” (see page 14)
SPEED
“SPEED” (see page 14)
03 FILTER
ND
“ND” (see page 15)
CC
“CC” (see page 15)
04 PEDESTAL
M.PED
“M.PED” (see page 16)
OFFSET
“OFFSET” (see page 16)
PED R
“PED R” (see page 16)
PED G
“PED G” (see page 16)
PED B
“PED B” (see page 16)
05 CHROMA
LEVEL %
“LEVEL %” (see page 17)
PHASE
“PHASE” (see page 17)
06 GAIN
GAIN
“GAIN” (see page 18)
AGC
“AGC” (see page 18)
AGC LIMIT
“AGC LIMIT” (see page 18)
AGC POINT
“AGC POINT” (see page 18)
07 COLORTEMP
COLOR TEMP
“COLOR TEMP” (see page 19)
GAIN R
“GAIN R” (see page 19)
AXIS G
“AXIS G” (see page 19)
GAIN B
“GAIN B” (see page 19)
08 WHITE BALANCE
W.BAL SELECT
“W.BAL SELECT” (see page 20)
GAIN OFFSET
“GAIN OFFSET” (see page 20)
GAIN R
“GAIN R” (see page 20)
GAIN B
“GAIN B” (see page 20)
ATW SPEED
“ATW SPEED” (see page 20)
ATW TARGET R
“ATW TARGET R” (see page 20)
ATW TARGET B
“ATW TARGET B” (see page 20)
- 8 -
ROP Menu (during AJ-CX4000 Connection)
To Next Page
Loading...
