Panasonic AK-HRP1005G

Connecting the Unit to AJ-CX4000 Cameras
Connections
Use a LAN cable to connect the <REMOTE> connector at the rear of the AJ-CX4000 to the <LAN> connector of the AK-
HRP1005G.
Set the connection setting to “LAN(AJ2)” in the [CONNECT SETTING] menu.
ヒチバチヒヘ
ヤヰワワユヤヵチヴユヵヵリワヨ
ロモワ
ドモルビナ
ワヰワワヰワ
ワヰワワヰワワヰワ
ヤモヮヒヤモヮピ
ヤモヮプ
ヤモヮフ
ヤモヮブ
ヤモヮビ
ヤヰワワユヤヵチヮヰュユドㄑㄖㄔㄉナ
ヤヰワワユヤヵチヮヰュユドㄑㄖㄔㄉナ
- 3 -
Connecting the Unit to AJ-CX4000 Cameras