15. LAN connector for IP control <LAN LINK/ACT>
This LAN connector (RJ-45) is connected when exercising IP control
over the unit from an external device. Use a LAN cable
*
1
(category 5e
or above, STP, max. 100 m (328 ft)) for connection.
*
1
Use of an STP (Shielded Twisted Pair) cable is recommended.
16. [AW‑UE50]
3G SDI OUT connector <3G SDI OUT>
This is an SDI video signal output connector. Depending upon the
output signal format, 3G-SDI or 1.5G-SDI signals are output.
17. USB port
*
2
(Type C connector)
The unit can be used as a Web camera by connecting the unit and a
personal computer with USB Video Class.
*
2
USB2.0 DEVICE, No USB bus power functionality
18. HDMI connector <HDMI>
This is the HDMI video output connector.
19. Tripod screw holes
(Screw: 1/4-20 UNC, ISO 1222 [6.35 mm])
Use these screw holes when securing the unit to a tripod, etc.
Place the tripod on a completely flat and level surface.
Tighten the screws by hand to mount the tripod securely.
Use screw for mounting the tripod that satisfy the following standard.
Screw for mounting tripod
1/4-20UNC, ISO1222 (6.35 mm)
4.5 mm to 6 mm
(3/16 inches to 1/4 inches)
18
Parts and their functions (continued)
To Next Page
Loading...
