Panasonic AW-UE20KP User Manual

DVQP2657YA
W0222AM1042 -AV-PS
ENGLISH
Model No.
AW-UE20KP
Model No.
AW-UE20WP
Model No.
AW-UE20KE
Model No.
AW-UE20WE
Model No.
AW-UE20KED
Model No.
AW-UE20WED
Operating Instruction
Operations and Settings
4K Integrated Camera
Operations and Settings
Operating Instructions
This "Operations and Settings" describes how to operate the unit and how to
establish its settings.
For more information on how to perform basic operation and installation, refer to
the Operating Instructions "Basics".

Panasonic AW-UE20KP Specifications

General

Camera Type	PTZ Camera
Sensor Type	1/2.5-type MOS
Effective Pixels	8.3 MP
Video Output	HDMI, 3G-SDI, IP
Power Supply	DC 12V
Lens	20x Optical Zoom
Minimum Illumination	0.5 lx (Color), 0.1 lx (B/W)
Shutter Speed	1/1 to 1/10000
IP Protocol	IPv4, IPv6
Optical Zoom	20x
Operating Temperature	0 °C to 40 °C (32 °F to 104 °F)
Zoom	20x optical zoom
Resolution	3840 x 2160
Network Protocols	RTSP, RTMP, NDI|HX
Pan/Tilt Range	Pan: ±175°, Tilt: -30° to +90°
Video Format	H.265, H.264
Audio Input	3.5 mm stereo mini jack
Digital Zoom	8x
Gain	Auto/Manual
White Balance	Auto, Manual
Network Interface	Ethernet 10Base-T/100Base-TX
Storage Temperature	-20°C to 60°C
Dimensions (W x H x D)	178 mm x 178 mm x 194 mm

Summary

Initial Setup and Safety Precautions

Read This First!

Essential initial information and warnings for safe and proper operation of the camera unit.

Regulatory Information

FCC Notice (USA)

Compliance notice for the United States regarding FCC regulations for radio frequency devices.

Canadian Notification

Compliance information for Canada, referencing industry standards for electronic equipment.

AC Mains Lead Precautions

Caution for AC Mains Lead

Important safety instructions regarding the AC power cable connection and usage.

EMC Compliance Notice

EMC Notice for Purchaser/User

Information for users on achieving compliance with electromagnetic compatibility standards.

Environmental Disposal Guidance

Disposal of Old Equipment

Instructions for the proper disposal of the product at the end of its service life.

Document Information

Trademarks and Copyright

Lists registered trademarks, copyrights, and license information for software used in the product.

Abbreviations

Defines abbreviations used throughout the operating instructions for clarity and consistency.

Warranty Disclaimer

Disclaimer of Warranty

Outlines limitations of liability for the manufacturer regarding product use and potential damages.

Menu Navigation

Menu Structure Overview

Introduces the main menu, camera menu, system menu, and maintenance menu structures.

Menu Item Details

Details system and maintenance menu items for configuring camera functions and settings.

Troubleshooting

Operation and Connectivity Issues

Guides users through resolving common problems related to camera operation and connectivity.

IP and USB Problems

Addresses troubleshooting steps for IP image display and USB device recognition issues.

Specifications

Technical Specifications

Provides detailed technical data including power, dimensions, operating conditions, and interfaces.

Getting Started

PC Requirements

Lists the minimum personal computer requirements for optimal operation and setup.

Network Security

Network Security Best Practices

Provides guidelines and precautions to protect the unit and network from security risks.

Product Characteristics

Format Support and Sensor

Details supported video formats, sensor type, and lens specifications for image quality.

Installation and Operation Features

Highlights features like pan-tilt head integration, flexible layout, and online meeting support.

Remote Control and Power

Explains wireless control capabilities and PoE+ power supply benefits for simplified setup.

Accessories

Included and Optional Items

Lists accessories included with the product and optional accessories available for purchase.

Operating Precautions

Usage and Environmental Guidelines

Provides guidance on lighting, temperature, humidity, and avoiding light sources.

Handling, Maintenance, and Software

Covers unit handling, maintenance, disposal, and software licensing information.

Parts and Functions Overview

Component Identification

Identifies and describes key components of the camera unit, including lens and indicators.

Connector Interfaces

Details the various input/output connectors like RS-422, RS-232C, and their pin assignments.

Service Switch and Initialization

Explains the service switch functions for default resets and system initialization.

Video Output and Power Connectors

Describes HDMI, SDI connectors for video output and DC IN for power connection.

Wireless Remote Control Operation

Remote Control Usage

Details the buttons and functions of the wireless remote control for camera operation.

Signal Reception Areas

Illustrates the locations of signal light-sensing areas for optimal wireless remote control performance.

Network Configuration

Easy IP Setup Software

Guide on using Easy IP Setup Software to configure the unit's network settings.

EasyIP Setup Tool Plus Software

Instructions for using the EasyIP Setup Tool Plus Software for network configuration.

IPv6 Network Configuration

Details on configuring IPv6 network settings, including address and gateway.

Common Network Settings

Covers HTTP port, IP setup accommodation period, and port forwarding functions.

Initial Account Setup

Setting the Initial Account

Procedure for setting up the initial user name and password for accessing the unit.

Basic Shooting Operation

Performing Basic Shooting

Steps for basic camera operation, including subject brightness and scene mode selection.

Power Management

Power On/Off Procedures

Instructions for powering the camera unit on and off using remote control or controller.

Priority Mode Settings

Configuring Priority Mode

Details on setting the priority mode for various video output applications like HDMI, USB, IP.

Camera Unit and Scene Mode Selection

Camera Unit Selection

Procedure for selecting the camera unit to be operated via remote control or controller.

Scene Mode Selection Guide

Explains scene mode types and how to select them for optimal shooting conditions.

Remote Control Operations

Picture Direction and Zoom

How to control camera direction (pan/tilt) and zoom using remote control or controller.

Speed and Controller Operations

Adjusting movement speed and operating via controller (AW-RP60/AW-RP150).

Basic Shooting Troubleshooting

Resolving Basic Shooting Problems

Troubleshooting common issues encountered during basic shooting operations.

Advanced Operations

Preset Memory Management

Instructions for registering and recalling camera settings using preset memories.

White Balance Adjustment

Automatic White Balance (AWB)

Procedure for automatic white balance adjustment using AWB A or AWB B memories.

Auto Tracking and Preset WB

Using ATW for auto correction and preset WB modes (3200K/5600K).

Menu Operation Guide

Menu Navigation Procedures

Explains how to navigate and operate camera menus using the wireless remote control.

Menu Item Details

Main Menu and Camera Menu

Details the main menu structure and the camera menu for image settings.

Scene Mode Settings

Picture Level and AGC Gain

Adjusts brightness level and maximum gain-up amount for different scene modes.

Iris and Shutter Settings

Slow Shutter and Iris Mode

Controls slow shutter function and selects iris adjustment mode (Auto/Manual).

Shutter Mode Options

Details Step and Synchro shutter modes and their corresponding speed settings.

Image Quality Settings

Gain, Frame Mix, and Chroma

Adjusts gain, frame addition, and chroma level for image quality.

Color Balance and Tone Settings

White Balance and RGB Gain

Manages white balance modes and adjusts Red/Blue gain for accurate color reproduction.

Detail, Contrast, and Correction Features

Adjusts image detail, contrast, DRS, backlight compensation, and noise reduction.

System Menu: Priority Mode

Configuring Priority Mode

Sets the priority output mode for video, influencing available output terminals and formats.

Frequency Settings

Setting Frame Frequency

Configures the frame frequency (50Hz, 59.94Hz, 60Hz) affecting image format.

Format Settings

Changing Image Format

Selects the image format (e.g., 1080/50p) which can differ based on the selected frequency.

Installation and Preset Configuration

Install Position and Preset Speed

Sets installation method (Desktop/Hanging) and preset speed table (Slow/Fast).

Preset Scope Options

Selects items to recall for preset memory regeneration (Mode A, B, C).

Zoom and Focus Control

Zoom Position Speed and Focus Adjust

Configures zoom speed relative to position and PTZ focus adjustment.

Zoom Mode Selection

Selects zoom mode: Optical Zoom, i.Zoom, or Digital Zoom.

Advanced Zoom and Indicator Settings

Digital Zoom and Extender

Sets maximum digital zoom magnification and digital extender function.

Tally and Status Lamp

Configures tally lamp control and status display lamp behavior.

Camera Identification and Display

Wireless ID and OSD Settings

Sets remote control ID and OSD display behavior with tally signals.

Color Bar and Audio Output

Switches between camera image and color bars, and enables/disables audio input.

Audio Input/Output Settings

Input Type, Volume, Plugin Power

Configures audio input type (Mic/Line), output volume, and plugin power.

Protocol and Connector Selection

Sets serial communication protocol and connector type (RS422/RS232C).

Serial Communication Settings

Baud Rate and Camera Address

Configures baud rate for serial communication and camera address assignment.

Maintenance Menu

Language and Firmware Version

Manages unit language and displays firmware version information.

Servo Version and Network Display

Shows servo version and displays network configuration details like IP address.

Unit Initialization

Initializing Unit Settings

Procedure to reset most unit settings to their factory defaults.

Menu Table Reference

Menu Settings Summary

A table summarizing menu items, factory defaults, and available selection options.

Web Screen Access

Connecting via PC Browser

Steps to access the camera's web interface using a personal computer's web browser.

Web Screen Navigation

Switching Between Live and Setup

Instructions on how to switch between the live video screen and the setup screen.

Web Live Screen Operation

Live Screen Controls

Details on operating the camera (pan, tilt, zoom) and managing streaming via the web interface.

Web Screen Configuration

Setup Screen Selection

Guide on how to access and navigate the setup screen within the web interface.

Basic Settings

Priority Mode Selection

Configures the video output priority mode, affecting available terminals and frame rates.

Live Page (Camera Title) Setup

Setting the Camera Title

Allows customization of the camera name displayed in the live page title area.

Date and Time Settings

Configuring Date and Time

Sets date/time manually or synchronizes with PC/NTP server for accurate timekeeping.

Image/Audio Settings

Video over IP Configuration

Configures JPEG and H.264/H.265 image settings for IP streaming.

Audio Settings

Configuring Audio Input/Output

Enables/disables audio, sets input type, volume level, and plugin power.

Image Settings

Image Adjustments Overview

Provides access to image adjustment settings for fine-tuning the camera's visual output.

Image Adjustments

Image and Color Adjustments

Adjusts image parameters like scene mode, brightness, and gain.

Detail, Contrast, and Zoom Settings

Fine-tunes image detail, contrast, and zoom magnification for optimal clarity.

Picture, Iris, and Shutter Settings

Picture Level and Iris Mode

Adjusts picture brightness and selects iris mode for exposure control.

Shutter Mode Options

Details Step and Synchro shutter modes and their corresponding speed settings.

Image Quality Settings

Slow Shutter, Gain, and Frame Mix

Configures slow shutter, gain adjustment, and frame mix for image quality.

Color Balance and Tone Settings

White Balance and Gain Adjustments

Manages white balance modes and adjusts Red/Blue gain for accurate color reproduction.

Detail, Contrast, and Correction Features

Adjusts image detail, contrast, DRS, backlight compensation, and noise reduction.

Preset Position Management

Registering and Recalling Presets

Guides on setting, moving to, and registering preset camera positions.

Zoom and Focus Control

Zoom Position Speed and Focus Adjust

Configures zoom speed based on position and PTZ focus adjustment.

Preset Speed Settings

Sets the speed for preset movements and the preset speed table.

Preset Scope Configuration

Defining Preset Recall Parameters

Specifies which settings (focus, iris, gain, WB) are recalled with preset positions.

Pan-Tilt Limitation Settings

Setting Pan-Tilt Movement Limits

Establishes upper, down, left, and right movement limits for the pan-tilt head.

System Settings

Output Format Configuration

Configures the output image format based on frequency for HDMI and SDI.

Frequency and Installation Options

Sets frame frequency and installation position (Desktop/Hanging).

Preset Speed Settings

Configures preset speed table, preset speed, and preset scope.

Camera Control Settings

Zoom Speed and Focus Adjust

Controls zoom speed based on position and adjusts focus during PTZ operations.

Tally and Status Lamp

Manages tally lamp activation and status display lamp behavior.

Camera Identification and Display

Wireless ID and OSD Settings

Sets remote control ID and controls OSD display with tally signals.

Color Bar, Wireless Control, USB Video

Configures color bar display, wireless control, and USB video H.264 settings.

Protocol and Connection Settings

Serial Communication and Network Addressing

Sets serial protocol, connector, baud rate, and camera address.

User Management

User Authentication Setup

Configures user authentication, including methods, user names, and passwords.

Access Level and User Check

Defines access levels for users and provides a tool to check and delete user accounts.

Network Settings

IPv4 Network Configuration

Sets up IPv4 network parameters like DHCP, IP address, subnet mask, and gateway.

Gateway, DNS, and Server Addresses

Configures default gateway, DNS server, and primary/secondary server addresses.

IPv6 Network Configuration

Details the configuration of IPv6 network settings, including address and gateway.

Common Network Settings

Covers HTTP port, IP setup accommodation period, and port forwarding functions.

RTMP Streaming Setup

Configuring RTMP Streaming

Sets up server URL, stream key, and URL type for RTMP transmission.

NTP Time Synchronization

NTP Synchronization Options

Enables/disables NTP server synchronization and selects address acquisition method.

NTP Server Address and Port

Specifies NTP server address, port number, and time adjustment interval.

Maintenance Settings

Language Configuration

Sets the system language for the unit interface.

Software Version and Model Details

Displays model number, MAC address, serial number, and firmware versions.

OSS License Information

Provides access to download the Open Source Software license file.

Firmware Upgrade Procedure

Upgrading the Firmware

Step-by-step guide for downloading and installing firmware updates for the unit.

Default Reset and Reboot

Resetting Settings and Rebooting

Procedures for resetting unit settings to default and rebooting the system.

System Log Management

Viewing System Event Logs

Describes how to view and interpret event logs, including sequence, time, and code.

Error Log Management

Viewing System Error Logs

Explains how to view and interpret error logs, including operation time, code, and description.

Backup and Upload Settings

Settings Backup and Upload

Procedures for saving unit settings to a PC and uploading saved settings back to the unit.

Web Camera Functions

Controllable Functions Overview

Lists functions controllable via Web Camera mode, including image and color adjustments.

Detail, Contrast, and Zoom Settings

Adjusts image detail, contrast, and zoom magnification for web camera output.

Troubleshooting Guide

Operation and Control Issues

Resolves issues related to camera movement, remote control, and controller operation.

Network and Browser Access Issues

Addresses problems with accessing the camera via web browser, including IP and proxy settings.

Video Troubleshooting

Picture Display and Color Issues

Resolves issues like no picture, flipped images, color problems, and menu visibility.

Network and USB Troubleshooting

IP Image and USB Recognition Problems

Troubleshoots issues with IP image display, RTSP streaming, and USB device recognition.

Technical Specifications

General and Input Specifications

Details ambient conditions, dimensions, mass, supported controllers, and input interfaces.

Output and Input/Output Interfaces

Lists output ports (HDMI, SDI) and input/output interfaces (LAN, USB, RS-422/232C).

Product Performance Details

Camera Unit Specifications

Details image sensor, lens, field of view, illumination, resolution, gain, and shutter modes.

USB Connection Specifications

Specifies USB video/audio class, output formats, and resolution/frame rate tables.

IP Streaming Specifications

Covers IP streaming video compression, audio format, supported protocols, and AC adapter details.