109
Default Reset
The unit’s setting data is initialized and the unit is restarted in here.
Reset to the default (Except the network settings)
When the [Execute] button is clicked, the unit’s settings are returned to their defaults.
When the initialization operation is started, the unit is restarted so no operations can be undertaken for about 2
minutes.
[Note]
The following setting items will not be returned to defaults.
- [Priority Mode]
- [Frequency]
- [Format]
- All settings under [User mng.]
- All settings under [Network - Network]
- [AWB] adjustment values will not be returned to defaults.
Reboot
When the [Execute] button is clicked, the unit is rebooted.
After the unit has been rebooted, no operations can be undertaken for about 2 minutes as is the case when the unit’s
power is turned on.
To Next Page
Loading...
