Operating Instructions (Additional Features)
11
Setting Description
Return to
Specified
Position
• If the camera is not operated during the specified period,
the camera turns to the specified position.
• The following settings are available.
– Time - Do not move, 10 s, 20 s, 30 s, 1 min, 5 min, 10
min, 30 min, 1 h
– Specified Position - Home Position, Preset No.1–20,
Alarm No.1, Alarm No.2
Note
• If you did not set any presets, the camera cannot turn
to the preset position.
• When registering preset positions, set Time long
enough to complete the registration process.
If Time is set too short, the camera will return to the
specified position while registering preset positions.
To Next Page
Loading...
