Panasonic BL-C1 - Managing Buffered Images

Operating Instructions
27
1.4 Viewing the Buffered Image page
To buffer images in the camera's internal memory, you need to set up the image
transfer settings (see page 61 or page 71). Buffered images can be viewed on this
Buffered Image page.
1. Access the camera (see page 15).
• The Top page is displayed.
2. Click the [Buffered Image] tab at the top of the page.
3. Click the trigger number.
The trigger number is displayed (see page 61 or page 71).
The trigger is displayed
(see page 61 or page 71).