Operating Instructions
34
Basic
(1) Network Configures network settings to connect the camera to the
network (see page
36).
(2) UPnP Enables automatic port forwarding and creates a shortcut
to the camera (see page 40).
(3) DynamicDNS Registers with the DynamicDNS service (see page 43).
(4) Date and Time Sets the date and time, automatic time adjustment and
summer time settings (see page
49).
(5) Camera Sets camera name, white balance, AC power source
frequency and color night view (see page
51).
Account
(6) Administrator
*1
Sets authentication and administrator security (user name
and password) (see page 53).
(7) General User
*1
Sets general user security (user name and password) and
access levels (see page
58).
Buffer/Transfer
(8) Trigger Sets image buffer or transfer by timer or motion detection.
(See page
61 or page 71)
(9) Motion
Detection
Sets the threshold and sensitivity for motion detection (see
page 84).
(10) Sensor Log Sets the information required to send log notifications by e-
mail (see page
87).
To Next Page
Loading...
