Operating Instructions
52
3. Click [Save] when finished.
• The new settings are saved.
• When finished, "Success!" is displayed.
4. Click [Go to Camera page].
• The Camera page is displayed.
White Balance Select from the following options.
• Auto (default) — Automatic adjustment
• Fixed Indoor — Electric bulb (2800 K)
• Fixed Fluorescent
(White)
— White (3600 K)
• Fixed Fluorescent
(Daylight)
— Daylight (4000 K)
• Fixed Outdoor — Solar light (6000 K)
Note
The kelvin (symbol: K) is the standard unit for color
temperature.
AC Power
Source
Frequency
• This setting may correct flickering caused by power line
frequency.
– 50 Hz (default)
–60 Hz
Color Night
View
• In the color night view mode, the camera image becomes
brighter in a low illuminance. The camera image returns to
normal operation in a bright location.
• If you enable the color night view mode, refresh interval
may increase.
• Subjects that are moving in low illumination may be
blurred, not distinguished, or not displayed.
Note
When the camera transmits a dark scene, the camera
image may become white, or horizontal lines may be
displayed on the screen. This is one of the characteristics
of a CMOS sensor. This is not a malfunction.
Setting Description
To Next Page
Loading...
