Operating Instructions
62
4. Set the time, and click [Next>].
Note
The timer works by an internal clock. Set the date and time before using timer
buffer/transfer (see page
49).
• Clicking [<Back] takes you back to the previous page.
• Clicking [Cancel] takes you back to the Trigger page without saving
changes.
5. Set the image settings, and click [Next>].
• Clicking [<Back] takes you back to the previous page.
• Clicking [Cancel] takes you back to the Trigger page without saving
changes.
Tr i gge r • Selecting [Timer] enables the camera to buffer/transfer
images during the specified date and time by timer.
• Selecting [Motion Detection] enables the camera to buffer/
transfer images when the motion is detected during the
specified date and time.
Setting Description
Day of the week • Check the box to enable the day. Uncheck the box to
disable it.
Active Time of
Tr i gg er
• To set a trigger time, check the time option and set a time
period. Check the [Always] option if you are not specifying
a time period.
Setting Description
To Next Page
Loading...
