23
Adjusting Range and Sensitivity
Preventing Sensor Interference (BL-C160 Only)
If objects are interfering with the built-in sensor, use one of the included sensor range caps to cover
the corresponding area of the sensor.
For Built-in Sensors
Example 1
If there are interfering objects (such as cars) on one side or corner of the screen, attach cap 1 or 2
to cover the desired area of the sensor.
• In the example below, the object in the upper-left corner of the image may interfere with the
sensor, therefore, the upper-right corner of the sensor should be blocked using a sensor range
cap.
To Next Page
Loading...
