22
Operation
Starting Up/Shutting Down
<Only when the port replicator (external display, exter-
nal keyboard) is connected>
If [Enter Password] is displayed
3 Log on to Windows
After confirming that the hard disk drive indicator ( ) has turned off, select the
user and input the password, then select . Until the correct password is entered,
the computer will not operate.
When an application or file that was previously displayed
appears on your screen
The standby or hibernation mode ( “Standby/Hibernation Functions”)
has been set.
Three incorrect attempts
or
No password for about a minute
The correct password
Will Start
Will Not Start
(Power off)
*
1
Supervisor Password or User Password set in the Setup Utility (not
the Windows password).
Enter Password [ ]
Enter your password*
1
and press Enter . ( “Security Measures”)
To Next Page
Loading...
