29
Troubleshooting
Dealing with Problems (Summary)
When a problem occurs, power off the wireless display, then connect the optional port
replicator (CF-VEB071), external keyboard and external display and refer to this page. The
“Reference Manual” also contains detailed information. If a problem appears to be related
to a software application, read the software related manual. If you still cannot troubleshoot
the problem, contact Panasonic Technical Support.
Starting Up
The power indicator
or battery indicator
is not lit
[Enter Password] is
displayed
POST Startup
Error(s) is displayed
Windows startup, or
an operation is ex-
tremely slow
The date and time
are incorrect
The cursor cannot be
controlled
Check the cable connection for the AC adaptor.
Check to see if a fully charged battery is properly installed.
Remove the battery pack and disconnect the AC adaptor,
then connect them again.
Input your password. If you have forgotten it, contact Pana-
sonic Technical Support.
page 26
Press F9 in the Setup Utility ( “Setup Utility”).
This will restore the Setup Utility's settings to their default
values (except the password settings). Then, the Setup Util-
ity must be run once again for you to input the appropriate
operating environment settings. (The processing speed de-
pends on the application software used, so this operation may
not cause the processing speed to increase.)
You can set the date and time through [Control Panel] -
[Date, Time, Language, and Regional Options] - [Date
and Time].
When the computer is connected to a LAN, confirm the
date and time of the server.
If you continue to experience problems, the internal bat-
tery maintaining the clock may need to be replaced. Con-
tact Panasonic Technical Support.
This computer will not correctly recognize the date and
time starting from the year 2100 A.D.
Restart the computer by using the keyboard (e.g.,
Ctrl + Esc , or ).
When the port replicator is not connected, turn off the
computer.
To Next Page
Loading...
