21
Operation
Starting Up/Shutting Down
1 Turn your computer on
Press the power switch and hold it for approximately
one second until the power indicator turns on before
releasing it.
Starting Up
2 After confirming the display status in-
dicator lit, turn on the wireless
display( Operating Instructions of the wireless
display)
After confirming that the power indicator has turned on, avoid the following
until Windows has completed loading.
• Connecting or disconnecting the AC adaptor.
• Touching the power switch.
• Performing any keyboard or external mouse operations.
Once the computer is powered off, you must wait at least ten seconds before
powering it on again.
When the computer is turned on in a low-temperature environment, start-up
may take longer than usual, in order to ensure stable operation of the
computer’s systems.
When the CPU temperature rises, the computer may not power on to prevent
the CPU from overheating. Should this happen, allow the computer to cool
down then switch the power on again.
If the computer still does not power on, contact Panasonic Technical Sup-
port.
CAUTION
Do not maximize the Command Prompt screen. Once maximized, the connection
with the wireless display is interrupted. The connection cannot be re-established
and the computer no longer operates. In such cases, the computer must be powered
off. Data may be lost.
CAUTION
Power Switch
Display Status
Indicator
To Next Page
Loading...
Need help?
General