11
E
Deleting (Initializing) Owner’s Data
When you dispose of the computer or transfer the ownership, delete (initialize) the
owner’s data to avoid unauthorized access.
1 Disable Power-on Security
Performed by the Computer Administrator.
A Click [start] - [All Programs] - [Protector Suite QL] - [Control Center].
· The “Fingerprint Software Management” screen appears.
B Click [Settings], and click [Power-on Security].
C Remove the check mark from [Replace the power-on and hard drive pass-
words with the fingerprint reader.], and click [OK].
D Click [Fingerprints], and click [Enroll or Edit Fingerprints].
· “User Enrollment” wizard starts. Follow the on-screen instructions.
E When the “User’s Fingers” screen appears, click [Next] without deleting fin-
gerprint samples.
F Click [Manage Passwords...].
G Select [Power-On] in [Password Types], and click [Unset password...].
H Enter the password for Power-on Security, and click [OK].
I Click [Close].
· Confirm that there is no item in [Password Types].
J Click [Next].
· At the confirmation message, click [Yes].
K Click [Next].
L Click [Finish].
· Follow the on-screen instructions.
The data enrolled in the fingerprint sensor is not image data. You cannot restore
fingerprint image data from the data enrolled in the fingerprint sensor.
NOTE
To Next Page
Loading...
