7
E
The number of fingerprints for “Power-on Security” is maximum of 21, be-
cause they are stored in the fingerprint sensor regardless of the selected
enrollment mode.
NOTE
We recommend you use the Power-on Security feature. This feature pre-
vents unauthorized access to the user’s computer at the BIOS level.
A When the “Power-on Security” screen appears, click [Manage Passwords...].
B Select [Power-On] in [Password Types], and click [Set password...].
C Enter the password for “Power-on Security”, and click [OK].
D Click [Close].
E Add a check mark for [Power-On] in [Password Types].
F Enter the password (step C), and click [OK].
G Click [Next].
· Follow the on-screen instructions.
To Next Page
Loading...
