Panasonic CF-52 Series

8
To use wireless communication, set the wireless device setting
([Wireless LAN] / [Bluetooth] / [Wireless WAN]) to [Enabled] (default) in
the [Advanced] menu of the Setup Utility.
It may take some time to turn off wireless communication after
switching the wireless switch to off.
Do not turn on/off the switch repeatedly at too short intervals.
Do not restart, log off, or enter standby or hibernation immediately after
turning on/off the switch.
Do not turn on/off the switch while Windows is starting up.
NOTE
To check the wireless communication status
Place the cursor over the Wireless Switch Utility icon ( or ) on the
notifi cation area. A tooltip appears.
<CF-52 Series>
Description of Parts