Handling and Maintenance
8. <For model with ExpressCard Slot>
A
Remove the cushion, and pull out the connector in the direction of
the arrow.
B
Remove the screws (2), and remove the cover.
C
Pull back the sheet.
D
Pull back the black tape.
E
Remove the screws (3).
F
Remove the ExpressCard Slot.
9. Remove the screw (1), and remove the resin portion.
10. Remove the connectors on the built-in bridge battery.
Insulate the connectors on the built-in bridge battery by covering them with
plastic tape, for example.
To Next Page
Loading...
