Useful Information
25
7 Press
F2
or
Del
while [Panasonic] boot screen is displayed.
The Setup Utility starts up.
●
If the password is requested, enter the Supervisor Password.
8 Select the [Exit] menu, then select CD/DVD drive or commercially
available optical drive in [Boot Override] and press
Enter
.
The computer will restart.
9 Click [Reinstall Windows] and click [Next].
10
At the confirmation message, click [YES].
11 At the License Agreement screen, click [Yes, I agree to the provisions
above and wish to continue!] and click [Next].
12
<For MUI OS model>
Click [Next].
If the option is displayed, select the setting and click [Next].
●
[Reinstall with HDD recovery partition.]
Standard recovery method.
You can use recovery from Recovery Partition.
●
[Reinstall without HDD recovery partition.]
Increase usable HDD size.
You can NOT use recovery from Recovery Partition.
When this option is selected, you can no longer create Recovery Disc(s) after the
recovery operation.
CAUTION
●
Carefully choose above item because you cannot change it later.
13 Click [Next].
<Only for model with onboard drive>
If the installation drive is displayed, confirm it.
If the option is displayed, select the setting and click [Next].
●
[Initialize and reinstall Windows to the whole Disk]
Select this option when you want to install Windows to the factory default. After
installation, you can create a new partition. For how to create a new partition, refer to
“To change the partition structure” (è page 12).
●
[Reinstall Windows to the OS related partitions]
*2
Select this option when the hard disk has already been divided into several partitions
and you want to keep the partition structure. For how to create a new partition, refer to
“To change the partition structure” (è page 12).
*2
This does not appear if Windows cannot be installed to the recovery partition and the area
usable by Windows.
To Next Page
Loading...
