Panasonic CF-R1 Series User Manual

Touch
Pad
Use the
touch
pad
to
move the
cursor on
the display and
perform normal
computer operations.
By
design
the
touch
pad
is
to be
used
with a
finger Up
only. Therefore, do not use any
other type
implement
on the
touch
pad,
i.e.
stylus, pen, or pencil
eraser.
Work
Surface
Right
Button
Button
Function
Moving
the
Cursor
Touch Pad
Operation
Move the
tip
of
your
finger
lightly
over the
surface.
Tapping/Clicking
Double-Tapping/
Double-Clicking
Dragging
or
or
or
Two
quick taps, but on
the While holding
down
the
but-
second
tap
leaving
your
fin- ton, moving
your finger on
ger
down
(applying
pres-
the
work
surface,
sure) and
moving it on the
work
surface.
Scroll
Trace
the
circumference
woric surface.
Refer to
[Mouse
Properties]*
for
information on basic
operations
other
than
the
above.
[Startl
-
[Settings]
-
[Control Panel]
-
jMousel
:
fstartj
-
[Conirol
Panel]
-
[Printer.s
and Other
Hardware]
-
fMouse]
iWirTdows^OOOi
eWimlows^XPJ
Hanjdiing
the^
.
Do
not place
any
object
on
the work
surface or press
down forcefully
with
sharp-pointed
objects (e.g.,
nails)
or hard
objects
that can leave marks (e.g.,
pencils
and ball
point pens).
I
Try
to
avoid
having
any harmful
substances such
as
oil,
come
in contact
with the touch pad.
The
cursor
may
not
work
properly in such cases.
t
When
the
touch
pad
becomes
dirty;
Wipe
to remove
dirty areas
by using a dry soft
cloth such
as gauze or
a soft cloth
first
applied
with
detergent
diluted with
water
and
then
thoroughly wrung.
Do
not
use
benzene,
thinner, or
disinfectant-type alcohol.
17

Panasonic CF-R1 Series Specifications

General

Brand	Panasonic
Model	CF-R1 Series
Category	Laptop
Language	English