Specifications
YEFM285597A NT1104-1114 Printed in China
Panasonic Consumer Electronics
Company, Division of Matsushita
Electric Corporation of America
One Panasonic Way, Secaucus,
New Jersey 07094
http://www.panasonic.com
Panasonic Sales Company,
Division of Matsushita Electric of
Puerto Rico, Inc. (“PSC”)
Ave. 65 de Infanteria, Km. 9.5
San Gabriel Industrial Park,
Carolina, Puerto Rico 00985
http://www.panasonic.com
Panasonic Canada Inc.
5770 Ambler Drive,
Mississauga, Ontario
L4W 2T3
http://www.panasonic.ca
Accessories
Instruction kit
Operating Instructions
(English: YEFM285597)
(Français: YEFM285598)
(Español: YEFM285599)
Q'ty: 1 set
Installation Instructions
(YEFM293891)
Q'ty: 1
Owners Information
Card
Q'ty: 1
Installation kit (YEP0FZ5698)
Lock Cancel Plate
Q'ty: 2
Mounting Bolt
Q'ty: 1
Rubber Bushing
Q'ty: 1
Mounting Collar
(YEFX0217263)
Q'ty: 1
Trim Plate
(YEFC05657)
Q'ty: 1
Power Connector
(YEAJ02877)
Q'ty: 1
Remote Control Unit
(includes a battery)
(EUR7641010)
Q'ty: 1
Notes:
¡ The number in parentheses underneath each accessory part name is the part number for maintenance and service.
¡ Accessories and their part numbers are subject to modification without prior notice due to improvements.
¡ Mounting Collar and Trim Plate are mounted on the main unit at shipment.
SEL
CAR AUDIO
MENU
SEL
POWER
SOURCE
SRC
SET
BAND MUTE
231
5
8
0
64
97
#
VOL
RANDOM
NUMBER
TUNE TUNE
SCAN REPEAT
DISP
General
Power supply :DC 12 V (11 V – 16 V DC), test volt-
age 14.4 V, negative ground
Current consumption :Less than 2.2 A (CD mode; 0.5 W 4
channels)
Maximum power output :50 W x 4 (at 1 kHz), volume control
maximum
Tone adjustment range :Bass: ±12 dB at 100 Hz,
Treble: ±12 dB at 10 kHz
Speaker impedance :4 – 8 Ω
Pre-amp output voltage :2.5 V (CD mode, 1 kHz, 0 dB)
Pre-amp output impedance :200 Ω
Subwoofer output voltage :2.5 V (only for CQ-C1401U)
Subwoofer output impedance :200 Ω (only for CQ-C1401U)
Dimensions (W x H x D) :178 x 50 x 160 mm
{7” x 1 15/16” x 6 5/16”}
Weight :1.3 kg {2 lbs. 14 oz}
Disc Player
Sampling frequency :8 times oversampling
DA converter :1 bit DAC System
Pick-up type :Astigma 3-beam
Light source :Semiconductor laser
Wave length :790 nm
Frequency response :20 Hz – 20 kHz (±1 dB)
Signal to noise ratio :96 dB
Total harmonic distortion :0.01 % (1 kHz)
Wow and flutter :Below measurable limits
Channel separation :75 dB
FM Stereo Radio
Frequency range :87.9 MHz – 107.9 MHz
Usable sensitivity :10.2 dBf. (75 Ω)
50 dB quieting sensitivity : 15.2 dBf. (75 Ω)
Frequency response :30 Hz – 15 kHz (±3 dB)
Alternate channel selectivity :75 dB
Stereo separation :35 dB (1 kHz)
Image rejection ratio :55 dB
IF rejection ratio :100 dB
Signal to noise ratio :62 dB
AM Radio
Frequency range :530 kHz – 1 710 kHz
Usable sensitivity :27 dB/µV (S/N 20 dB)
Above specifications comply with EIA standards.
Note:
¡ Specifications and design are subject to modification without
notice due to improvements.
¡ Some figures and illustrations in this manual may be different
from your product.
Power Output:
17 W RMS x 4 Channels at 4 Ω and ≤ 1%
THD+N
Signal to Noise Ratio:
85 dBA (reference: 1 W into 4 Ω)
To Next Page
Loading...
