1 ABOUT LEAD FREE
SOLDER (PbF)
Distinction of PbF PCB:
PCBs (manufactured) using lead free solder will have a PbF
stamp on the PCB.
Caution :
•
• •
• Pb free solder has a higher melting point than standard
solder; Typically the melting point is 50 - 70°F (30 -
40°C) higher. Please use a soldering iron with
temperature control and adjust it to 700 ± 20°F (370 ±
10°C). In case of using high temperature soldering iron,
please be careful not to heat too long.
•
• •
• Pb free solder will tend to splash when heated too high
(about 1100°F/600°C)
•
• •
• This lead free solder will be used for the products after
serial No. 1,000,001.
2 FEATURES
•
• •
• MP3/WMA Playback from CD-R/RW
•
• •
• Fully Motorized Front Panel
•
• •
• Innovated APM (Auto Preset Memory) method
•
• •
• Six Preset Modes (FLAT, ROCK, POP, VOCAL, JAZZ,
CLUB)
•
• •
• SQ7 (7 Bands Sound Quality)
•
• •
• CD Changer Control
•
• •
• DVD Changer Control
•
• •
• Customize the Display (Customize Function)
•
• •
• Delightful sound space thanks to system buildup
•
• •
• The difference among these models’ are mentioned below.
3 REPLACEING THE FUSE
Use fuses of the same specified rating 15 amps. Using different
substitutes or fuses with higher ratings, or connecting the unit
directly without a fuse, could cause fire or damage to the stereo
unit.
4 MAINTENANCE
Your products is designed and manufactured to ensure a
minimum of maintenance. Use a soft cloth for routine exterior
cleaning. Never use benzine, thinner or other solvent.
5 NOTES
[RADIO BLOCK]
Do not align the AM/FM package block. When the package
block is necessary, it will be supplied already aligned at the
factory.
[CD DECK BLOCK]
This model has no servo alignment points because
microcomputer controls the servo circuit
6 DIMENSIONS
7 LASER PRODUCTS
3
CQ-C8351N / CQ-C8301N / CQ-C7301N
To Next Page
Loading...
