Panasonic CQ-DP975

16
Sound Design Memory
CQ-DP975/DFX85EUC
Sound Design Memory Mode
A re sound setting (except for VOL and ATT) can be memorized
and recalled.
Purina kh
LILJIN L
Sound Design Memory Input
* Press SDM to select to the sound design memory mode.
* To preset sound setting, press the corresponding preset memory
button (1 to 4) for more than 2 seconds in Sound Design Memory
mode until the display blinks.
Comuna
x TM ty
* The preset memory buttons 5 and 6 are not valid for set sound
design memory. (call only)
Recall Programmed Sound
Design Memory
* When a desired preset memory button is pressed in sound
memory mode, the corresponding sound setting is called.
ii Preset number
* The preset memory button 5 is recommended for setting.
* The preset memory button 6 is used to release all sound settings.
To change to normal mode
Press SDM or DISP to change to the normal mode.
Note: When the sound design memory mode is selected but no
operation is made within 5 seconds, the mode will return to the
normal mode.