Panasonic CQ-DP975

ITOo-rozm
26
Installation Guide continued
@ As shown in Fig.3, gently push the lower side of the case and open its cover. Keep the removable face
plate in the case. Then, you can bring the plate safety.
@Open
@ Removable face plate case
7
OPush
Fig. 3
To install the Removable Face Plate
(D Fit either the edge of right or left holes in the face plate over the main unit's pin, and fit it over on the
other side while pushing it.
Security Indicator
© After fitting the face plate holes, move the face plate up and down a few times to make sure that it has
been fitted securely.
© Close the front panel and press the right side of face plate until “click” is heard.
Caution:
1. Before removing the removable face plate, make sure the power is off.
2. This removable face plate is not water-proof. Do not expose it to water or excessive moisture.
3. Do not remove the removable face plate, while driving your car.
4. Do not place the removable face plate on the dashboard or nearby areas where the temperature
rises to high levels.
. Do not touch the contacts on the removable face plate or on the main unit, since this may result in
poor electrical contacts.
. Vf dirt or other foreign substances get on the contacts, wipe them with a clean, dry cloth.
. Don't apply any strong downward force onto the face plate being open or it might be damaged.
CQ-DP975/DFX85EUC