Panasonic CQ-HX2083U

E
N
G
L
I
S
H
26
CQ-HX2083U
53
E
N
G
L
I
S
H
25
CQ-HX2083U
52
Display Settings [DISPLAY]
Dimmer/Contrast
Default: DIMMER 3/CONTRAST 3
Setting range: DIMMER 1 to 3/
CONTRAST 1 to 5
Spectrum Analyzer (S
·
A)
Display Pattern
Default: ALL
Setting range: A to E, ALL, STD (standard)
Off Display setting
You can select display pattern on the unit
off.
Default: BLACK
Setting range: DEMO, CLOCK, BLACK
Clock Adjustment
You can adjust the clock.
The clock uses 12-hour system.
F1
Car race
Space
Snow boad
MTB
All of A to E (random)
Standard
Direct Operation
S
E
T
S
E
T
PWRPWR BANDBANDBAND
FACEFACE SS
•
AS
•
A
DISPDISP DIMDIMDIM
MENUMENU RETRET
11222333
44555666
78
0
9
# MUTE
SCAN
DIMMERDIMMER
RANDOM
NUMBER
REPEAT
RETURNRETURNSOURCESOURCE
VOL
Car Audio
[S
.
A]
(spectrum
analyzer)
[DIM]
(DIMMER)
In the case of remote control, as an alternative to
performing operations from the menu, the opera-
tions can be performed directly using the buttons
shown below.
:Up
:Down
(Example: DIMMER/CONTRAST)
2
1
12 3
2
Submenu 3 Set1 Menu
For details on how to perform menu operations
using the remote control, refer to page 28.
Note:
≥ Press [MENU] or [DISP] (display) on the remote
control to return to the regular mode.
≥ Press /[RET] (RETURN) to return to the pre-
vious display.
Press.
Press.
Press.
Press.
:Demonstration display
:Clock display is on
:Black display
:Up
:Down
The following transition will be made by each [S
.
A]
pressing.
F1 Car race
Space Snow boad
Standard All of A to E (random) MTB
Note:
The background takes effect only with the spectrum
analyzer display.
The following transition will be made by each [DIM]
pressing.
After the time has been adjusted, it is entered only when
the screen is exited using /[RET] (RETURN).
The same setting can be performed by pressing the
[DISP] (display) key on the remote control during
power OFF.
(This appears for 2 seconds.)
(This appears for 2 seconds.)
(This appears for 2 seconds.)