E
N
G
L
I
S
H
28
CQ-HX2083U
55
E
N
G
L
I
S
H
27
CQ-HX2083U
54
Function Settings [FUNCTION]
Mute/Attenuation
You can select MUTE or ATTENUATION
when [MUTE] is pressed.
Default: MUTE
Setting range: MUTE, ATT
Button Operation Sound
(BEEP)
Default: ON
Security Function
The security indicator (LED) blinks when the
removable face plate is removed from the unit.
Default: ON
Excluding Sirius from
Source Selection
Default: OFF
: No sound.
:
Decrease the vol-
ume by 10 steps.
(Attenuation)
: Security function
is active.
: Security function
is non-active.
Security function
When the key in the ignition is turned OFF.
≥ Security message will be displayed.
≥ The panel removable alarm will be active.
When the removable face plate is removed.
≥ The security indicator blinks. (page 69)
(Example: MUTE/ATT) (Example: ATT)
12 3
2
Submenu 3 Set1 Menu
For details on how to perform menu operations
using the remote control, refer to page 28.
Note:
≥ Press [MENU] or [DISP] (display) on the remote
control to return to the regular mode.
≥ Press /[RET] (RETURN) to return to the pre-
vious display.
≥ Refer to Operating guide for Sirius about Sirius.
Press. Press.
Press.
Press.
: Operation sound
(beep) is on.
:
Operation sound
(beep) is off.
:
Sirius mode is se-
lectable as a source.
: Sirius mode is
not selectable as
a source even if
the Sirius receiver
is connected.
To Next Page
Loading...
