Panasonic CQ-VD6503W - Page 16

Pin
No.
Port Description I/O Vol
(V)
45 OSD
CSEL (NC)
NC(OPEN) - -
46 X- Transistor SW output
for touch panel side X (
- pole)
O 0
47 Y- Transistor SW output
for touch panel side Y (
- pole)
O 0
48 X+ Transistor SW output
for touch panel side X (
+ pole)
O 4.9
49 Y+ Transistor SW output
for touch panel side Y (
+ pole)
O 4.9
50 RX For Flash rewriting I 0.5
51 TX For Flash rewriting O 0
52 IP SO IP Serial data output O 0
53 IP SI IP Serial data input I 0
54 IP SCK IP Serial clock output O 0
55 IP STR IP STR control O 0
56 IP RESET IP RESET output O 0
57 NC NC(OPEN) - -
58 NC NC(OPEN) - -
59 AVREF Reference voltage
input 0 of A/D converter
- 4.9
60 AVSS A/D converter grand
potential
- 0
61 XG Touch panel side X
with respect to - pole
I 0
62 YG Touch panel side Y
with respect to - pole
I 1.2
63 XR Touch panel side X
with respect to + pole
I 0
64 YR Touch panel side Y
with respect to - pole
I 1.2
65 LIGHT
SENS
DIMMER input I 3.9
66 A/D KEY A/D key input for TILT
and OPEN/CLOSE
I 4.9
67 A/D KEY GND connection I 0
68 A/D KEY GND connection I 4.9
69 NC NC(OPEN) - -
70 TFT CLK Serial communications
clock for the main CPU
I 4.9
16