Panasonic CR-SM4208U - Initial Setup; First Time Power On; Clock Adjustment

11
Qsfqbsbujpo
First time power on
1
Turn the key in the ignition until the ac-
cessory indicator lights.
2
Press [PWR] (Power).
Clock Display Setting
1
Hold down [DISP](CLK) for more than 2
seconds to adjust clock setting.
2
Press [SEL] to open the clock display
setting display.
3
Press [!!!!!!!] or [!!!!!!!] to adjust.
the 24-hour system used (default)
!!
the 12-hour system used
4
Press [SEL] to determine the setting.
Notes:
 If no operation takes place for more than 5
seconds in the clock display setting, the display
returns to the regular mode.
 Selection of the 12-hour system displays “AM”
during AM hours and “PM” during PM hours.
 To exit from the clock display setting, press
[DISP].
Clock adjustment
*The 12-hour system is used for example.
1
Press [DISP](CLK).
(Clock display)
2
Hold down [DISP](CLK) for more than 2
seconds.
*Indicator for AM or PM time
Hour blinks
3
Adjust the hour.
[!!!!!!!!] : Sets ahead.
[!!!!!!!!] : Sets back.
Hour entered
4
Press [DISP](CLK).
Minute blinks
5
Adjust the minute.
[!!!!!!!!] : Sets ahead.
[!!!!!!!!] : Sets back.
Minute entered
6
Press [DISP](CLK).
Completed
Notes:
 Clock time is displayed when the unit is power off.
 “CLOCK ADJUST” is displayed when the clock is
not adjusted.
 Hold down [!!!!!!!!] or [!!!!!!!!] to change numbers
rapidly.
 When you want to readjust the time, repeat steps
2 to 6.
!!
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
r
r
r
r
r
r
r
r
r
r
r
r
r
r
r
r
r
r
r
r
r
r
r
r
r
r
r
r
r
r
r
r
r
r
r
r
r
r
r
r
!
!
!
!
!!
!
r
r
r
r
r
r
r
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
!
!
!