Panasonic CR-SM4208U - Alarm Setting; Setting the Alarm Time

38
Bmbsn!Tfuujoh
Alarm time setting
*The 12-hour system is used for example.
1
Hold down [ALM] (Alarm) for more than
2 seconds.
(Alarm time display)
“ALARM ADJUST” is displayed when the alarm
time is not adjusted.
2
Hold down [ALM] for more than 2 sec-
onds after the above display is shown.
Hour blinks
3
Adjust the hour.
[!!!!!!!!] : Sets ahead.
[!!!!!!!!] : Sets back.
Hour entered
4
Push [ALM].
Minute blinks
5
Adjust the minute.
[!!!!!!!!] : Sets ahead.
[!!!!!!!!] : Sets back.
Minute entered
6
Push [ALM] to complete.
Completed
The alarm is set to ON automatically after com-
plete alarm time setting.
Alarm indicator (
) lights.
Notes:
 When the clock (
!!!!!!!!page 11) is not set, perform
and complete the alarm time setting, the clock
time will set to “13:00” automatically. Please
readjust the clock time depending on the actual
clock time.
 Hold down [!!!!!!!!!] or [!!!!!!!!] to change numbers
rapidly.
 When you want to readjust the alarm time, repeat
steps 1 to 6.
[!!!!!!!!]/[!!!!!!!!]
sets the hour and minute
[ALM]
selects items in the
alarm time setting.
it
ems
in
t
he
i
me setting.
!
!
]
]
]
]
]
]
]
]
]
]
]
]
]
]
]
]
]
]
]
]
]
]
]
]
]
]
]
]
]
]
]
]
]
]
]
]
]
]
]
]
]
]
]
]
]
]
]
]
]
]
]
]
!
r
r
r
r
r
r
r
r
r
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
!!
!
!
!
!!
!
!
!!
!
!!