Unit Indoor unit Outdoor unit
Fan Motor Description Cross-flow Fan Propeller Fan
Material AS + Glass Fiber 20% AS + Glass Fiber 20%
Type Induction (4-poles) Induction (6-poles)
Input W 29.3 - 26.3 134.6 - 118.8
Rated Output W 15 50
Fan Speed Low rpm 750 - 750 —
Medium rpm 920 - 920 —
High rpm 1,160 - 1,160 760 - 720
SuperHigh rpm 1,250 - 1,250 —
Heat Exchanger Description Evaporator Condenser
Tube material Copper Copper
Fin material Aluminium Aluminium (Blue Coat)
Fin Type Slit Fin Louver Fin
Row / Stage (Plate fin configuration, forced draft)
2×15 2×24
FPI 19 16
Size (W × H × L) mm 610 × 315 × 25.4 560 × 609.6 × 44
Refrigerant Control Device — Capillary Tube
Refrigeration Oil (c.c) — SUNISO 4GDID or ATMOS M60
or ATMOS 56M
Refrigerant (R-22) g (oz) — 700 × 2 (24.7 × 2)
Thermostat — —
Protection Device — Overload Protector
Capillary Tube Length mm — 680
Flow Rate l/min — 11.5
Inner Diameter mm — 1.5
Air Filter Material
Style
P.P.
Honeycomb
—
Capacity Control Capillary Tube
Compressor Capacitor µF, VAC — 25 µF, 370/400 VAC
Fan Motor Capacitor µF, VAC 1.5 µF, 440 VAC 3.0 µF, 450 VAC
Note:
• Specifications are subjected to change without prior notice for further improvement.
7
CS-C9DKZW CU-2C18DKH / CS-C9DKZW CU-3C20DKH
To Next Page
Loading...
