Indoor unit Outdoor unit
Fan Motor Description Cross-flow Fan Propeller Fan
Material AS + Glass Fiber
20%
AS + Glass Fiber 20%
Type Induction (4-poles) Induction (6-poles)
Input W 29.3 - 26.3 134.0 - 118.7
Rated Output W 15 50
Fan
Speed
Low rpm 750 - 750 —
Medium rpm 920 - 920 —
High rpm 1,160 - 1,160 765 - 725
SuperHigh rpm 1,250 - 1,250 —
Heat
Exchanger
Description Evaporator Condenser
Tube material Copper Copper
Fin material Aluminium Aluminium (Blue Coat)
Fin Type Slit Fin Louver Fin
Row / Stage (Plate fin configuration, forced draft)
2×15 2×24
FPI 19 16
Size (W × H × L) mm 610 × 315 × 25.4 756.0
719.5
× 609.6 × 44
Refrigerant Control Device — Capillary Tube
Refrigeration Oil (c.c) — SUNISO 4GDID or ATMOS M60 or ATMOS 56M
Refrigerant (R-22) g (oz) — (A unit) 770 (27.2)
(B unit) 1,070 (37.8)
Thermostat — —
Protection Device — Overload Protector
Capillary
Tube
Length mm — 935, 920, 1,170
Flow Rate l/min — 20.0, 15.5, 10.0
Inner Diameter mm — 2.0, 1.8, 1.6
Air Filter Material
Style
P.P.
Honeycomb
—
Capacity Control Capillary Tube
Compressor Capacitor µF, VAC — 25 µF, 440 VAC
Fan Motor Capacitor µF, VAC 1.5 µF, 440 VAC 3.0 µF, 450 VAC
Note:
• Specifications are subjected to change without prior notice for further improvement.
9
CS-C9DKZW CU-2C18DKH / CS-C9DKZW CU-3C20DKH
To Next Page
Loading...
