80
New Deice Judgement Selection
Note:
By default is New Deice Judgement.
16.3.2 RESET (RC)
To clear and restore the remote control setting to factory default.
o Press once to clear the memory.
16.3.3 RESET (AC)
To restore the unit’s setting to factory default.
o Press once to restore the unit’s setting.
16.3.4 TIMER
To change indoor unit indicators’ intensity.
o Press continuously for 5 seconds.
16.3.5 TIMER
To change remote control display from Degree Celsius (°C) to Degree Fahrenheit (°F).
o Press continuously for 10 seconds.
Normal display mode
Press SW (t ≥ 0secs)
When SW pressed continuously for t ≥ 5secs to enter service zone
& press SW’s to choose function 60
Transmit
“No or Yes” code
Switching
= No
Switching
= Yes
To Next Page
Loading...
