8.1.3. Indoor Fan Motor Operation
There are 31 fan speed numbers assigned for different fan speed operation at designed conditions, as shown in below table. The
fan speed can be set manually using remote control (5 speeds for cooling mode: Lo, Me-, Me, Me+, Hi; 5 speeds for heating: Lo,
Me-, Me, Me+, Shi) or let it automatically changes depending on the operation and its environment.
Fan
Speed
No.
CS-E9CKP CS-E12CKP/E15CKP Remark
Voltage
(V)
Cooling Dry Heating Voltage
(v)
Cooling Dry Heating
0 OFF OFF OFF OFF OFF OFF - Hot start control.
- Deice control.
1
2 3.03 3.03
3 3.05 SLo 3.05 SLo - Soft Dry operation mode.
- ON timer pre-operation (D).
4 3.13 3.13 - Auto operation mode judgment (C/D).
- ON timer preparation sampling (C/D).
5 3.15 3.23 - Auto operation mode judgment (H).
- ON timer preparation sampling (H).
6 3.16 Lo 3.29 Lo - ON timer pre-operation at Auto fan (C).
7 3.23 Lo 3.34 - ON timer pre-operation at Auto fan for E9CKP
(H).
8 3.24 3.40
9 3.31 Me- 3.44 Me-
10 3.36 3.53
11 3.39 Me- 3.60 Me - Powerful Mode at Lo fan for E12CKP/E15CKP
(C).
12 3.44 3.63
13 3.47 Me 3.66 Lo - Powerful Mode at Lo fan for E9CKP (C).
- ON timer pre-operation at Auto fan for
E12CKP/E15CKP (H).
14 3.55 Me 3.68 - Powerful Mode at Lo fan for E9CKP (H).
15 3.57 3.71
16 3.60 3.75 Me-
17 3.63 Me+ 3.77 Me+ - Powerful Mode at Me- fan (C).
18 3.66 3.83
19 3.68 3.85
20 3.71 3.86 Me - Powerful Mode at Lo fan for E12CKP/E15CKP
(H).
21 3.73 Me+ 3.91 - Powerful Mode at Me- fan for E9CKP (H).
22 3.77 3.94
23 3.79 3.98 Me+ - Powerful Mode at Me- fan for E12CKP/E15CKP
(H).
24 3.80 4.00
25 3.82 Hi 4.00 Hi - Powerful mode at Me, Me+ or Hi fan (C).
26 3.85 4.01
27 3.89 4.05 SHi
28 3.90 SHi 4.08
29 3.91 4.11
30 3.93 SHi 4.16 SHi - Powerful mode at Me, Me+ or Hi fan (H).
31 4.07 4.30
18
CS-E15CKP CU-E15CKP5
To Next Page
Loading...
Need help?
General
