Panasonic CS-F28DB4E5 Service Manual

105
12.4.3. Test operation using the wired remote control
1. Check that “COOL” is displayed on the LCD, and then press the OFF/ON button to start test operation.
2. After pressing the OFF/ON button, press the TEST RUN button within 1 minute.
3. Then, the pipe temperature (gas pipe) will be displayed in the LCD of the remote control.
4. Check that the pipe temperature in the display of the remote control starts dropping after operation has been continuing for
sometime.

Panasonic CS-F28DB4E5 Specifications

General

Brand	Panasonic
Model	CS-F28DB4E5
Category	Air Conditioner
Language	English