The air conditioner No."01" appears during normal installation and use.
When using group control, a different number may appear.
The air conditioner No. can be displayed by pressing the air conditioner No. button.
(=same as Temp. up and down button)
When an abnormality occurs at this unit, "check" flashes in the display.
• Press the check button while the display is flashing.
The timer display will change and an error code from F15 to F44 will appear in place of time.
(the temperature setting display will also change to show the air conditioner. No.)
• Press the timer set button while the error is displayed.
The F15-44 display will change to the detail display.
• How to display the past error message
If the CHECK display on the wired remote control is not flashing, press the CHECK button continuously for 5 seconds or more
to display the past problem details.
92
To Next Page
Loading...
Need help?
General
