POWER
LOW
HIG
H
SLEEP TIMER
P
OW
ER
F
UL
P
O
WE
R
MONI
T
O
R
● At Cooling • Soft Dry (auto Fan Speed)
Air will not be discharged for approximately 40
seconds. The unit is designed to prevent tobacco,
cooking and body odors from being discharged
together with the cool air.
● At Heating (POWER LED blinks)
This is to prevent cold air from blowing out. Please
wait.
● At Cooling • Soft Dry (auto Fan Speed)
The indoor fan repeatedly stops for 60 seconds
and operates for 30 seconds to check the indoor
temperature. Whenever the temperature reaches
the setting temperature, operation starts again.
● At Heating (POWER LED blinks)
When the outdoor temperature is low and
humidity is high, frost accumulates on the outdoor
unit. The POWER LED blinks when the unit is
melting the frost. (Please wait as defrosting may
take up to 10 minutes.)
● This occurs when the airflow from the air
conditioner cools the room.
● A ‘passt’ sound is heard during defrosting or
when the air conditioner operation has been
stopped. This is caused by the refrigerant
inside the air conditioner flowing in the
opposite direction.
● The air conditioner will expand or contract
due to changes in temperature, causing a
cracking sound.
● The sound of water flowing is caused by the
refrigerant flowing inside the unit.
● When defrosting, the frost melts and
changes to water and steam.
POWER
LOW
H
IG
H
SLEEP TIMER
POWE
R
F
UL
PO
WE
R
M
ONI
T
O
R
POWER
LOW
HIG
H
S
L
E
EP TI
ME
R
P
O
W
E
R
F
U
L
P
O
WE
R
M
ON
I
T
O
R
POWE
R
LOW
HIGH
SLE
E
PTI
ME
R
PO
W
ERFU
L
POWER M
O
NI
TO
R
Air is not
discharged
immediately
Operation
stops suddenly
Fog is blowing
out from the unit
There is a noise
The outdoor unit
gives off water
and steam
Problem? Reason
68
S-G95KE CU-G95KE / CS-G125KE CU-G125KE