Helpful Information
Remote control fails to function
1
If the remote control fails to function or has been
misplaced, carry out auto operation. Auto opera-
tion settings are automatic; the temperature can-
not be adjusted.
Turn the Power Supply to ON
Press the Auto Operation
button
The POWER LED blinks until the operation
mode is selected.
2
■ To cancel Auto
Operation
Press the Auto Operation button
again (POWER LED lights off).
Voltage fluctuation
The outdoor unit stops operation frequently due to a fluctuation in the voltage. Consult your dealer.
POWER
LOW
HIGH
SLEEP
TIMER
POWERFUL
POWER MONITOR
When there is a power failure
■ Power failure during operation
Auto Restart Control
■ If there is a power failure, operation will be au-
tomatically restarted under the previous op-
eration mode and airflow direction when the
power is resumed as the operation is not
stopped by remote control.
■ When the operation restarts, the outdoor unit
will operate only after 3~4 minutes.
● Power failure after the Timer has
been set
The Timer setting is cancelled. (Main unit’s
Timer LED is extinguished.) Once power is re-
stored, reset the Timer.
(Ex)
Power failure after the ON-Timer has been
set.
Thunder and lightning
PO
WER
LO
W
H
IG
H
SLEEP
TI
M
ER
POWERFUL
P
OW
ER
MO
NIT
OR
This air conditioner is equipped with a built-in surge protective device. However, in
order to further protect your air conditioner from being damaged by abnormally strong
lightning activity, you may switch off the main power supply and unplug from power
socket.
Hold the two panel openers of the front panel
and pull. (Replace after operation starts.)
1
2
Press SET Button
Press ON Button
(Indoor unit’s Timer
LED lights up.)
AUTO OFF/ON
TIMER
1
2
3
ON OFF
SET
CANCEL
70
S-G95KE CU-G95KE / CS-G125KE CU-G125KE
To Next Page
Loading...
