23
CARE AND CLEANING (CONTINUED)
WIRED REMOTE CONTROLLER
Cleaning the main unit and
Remote Controller
• Wipe clean using a soft, dry cloth.
• To remove stubborn dirt, moisten a cloth in warm water no hotter than 104 °F,
wring thoroughly, and then wipe.
• The air intake grille can be removed in order to wash it with water.
Removing and remounting the
air intake grille
Refer to “How to remove the filter” and “How to replace the filter” on page 22.
When using a footstool or the like, be careful not to let it tip over.
Washing the grille with water • Clean the grille gently using a soft sponge, or the like. Then wipe away any
remaining moisture.
• Neutral detergent may be used to remove stubborn dirt. Then rinse thoroughly
with water and wipe away any remaining moisture.
A separately sold wired remote controller (CZ-RD515U) used with this air
conditioner is also available. If you wish to use the wired remote control function,
you will need to purchase both the optional wired remote controller and its
connection kit (CZ-RC515U).
To Next Page
Loading...
Need help?
General
