To Next PageTo Next PageWhy does my Panasonic Air Conditioner stop for 12 minutes during heating?
When frost accumulates on the outdoor unit due to low outdoor temperatures and high humidity, the Panasonic Air Conditioner will stop operation for about 12 minutes to melt the frost (defrosting operation). Please wait until this operation ends, and the power indicator will light up.
Why does fog come out of my Panasonic Air Conditioner?
Condensation occurs when the airflow from the air conditioner cools the room.
How to fix a Panasonic CS-PE9CKE that doesn't operate for 3 minutes after being restarted?
Wait until the air conditioner begins to operate.
General| Cooling Capacity | 2.5 kW |
|---|---|
| Heating Capacity | 3.2 kW |
| Refrigerant | R32 |
| Type | Split System |
| Power Supply | 220-240 V, 50 Hz |
| Energy Efficiency Ratio (Cooling) | 3.21 |
| Indoor Unit Dimensions (W x H x D) | 870 x 290 x 214 mm |
Guidance on safe installation, relocation, and repair to prevent hazards.
Identification and numbering of parts for the indoor air conditioner unit.
Identification and numbering of parts for the outdoor air conditioner unit.
List of accessories provided with the air conditioner, including the remote control.
Detailed description of remote control buttons, signal, notes, and battery replacement.
Instructions for starting operation, setting modes, temperature, and fan speed.
Explanation of how the unit automatically selects operating mode based on conditions.
Instructions and notes for operating the air conditioner in heating mode.
Instructions and notes for operating the air conditioner in cooling mode.
Instructions and notes for operating the air conditioner in soft dry (dehumidification) mode.
Guide to setting vertical airflow automatically or manually for optimal comfort.
Instructions on how to manually adjust the horizontal airflow direction louvers.
Setting delay ON, delay OFF, or combined ON/OFF timers for automatic operation.
How to confirm, activate, or cancel previously set timer operations.
Step-by-step guide for cleaning the air filters to maintain performance.
Instructions for safely removing and cleaning the front panel of the indoor unit.
Using the Auto Operation button and managing remote control signal sounds.
Information on timer settings after power failure and lightning surge protection.
Recommendations for setting temperatures to save energy during cooling and heating.
Tips on filter cleaning, keeping doors closed, and unit placement for optimal efficiency.
Explanation of normal sounds and phenomena during air conditioner operation.
Troubleshooting steps for common abnormal operations and checks required.
How to display and interpret error codes for self-diagnosis of the unit.
Guidance on how to operate the unit temporarily until repairs can be made.
Procedure to evaluate air conditioner performance by measuring temperature differences.
Table detailing optimal indoor and outdoor temperature ranges for operation.
Important safety warnings regarding earthing, repairs, and usage.
Important information on power supply cord wiring colors and terminal connections.
