Unit CS-PW18DKE CU-PW18DKE
Heat Exchanger Description Evaporator Condenser
Tube material Copper Copper
Fin material Aluminium (Pre Coat) Aluminium (Precoat)
Fin Type Slit Fin Corrugated Fin
Row / Stage (Plate fin configuration, forced draft)
2×15 2×20
FPI 21 17
Size (W × H × L) mm 810 × 315 × 25.4 827.7
862.2
× 711.2 × 44
Refrigerant Control Device — Capillary Tube
Refrigeration Oil (cm
3
) — RB68A OR FREOL ALPHA 68M
Refrigerant (R410A) kg (oz) — 1,33 (47.0)
Thermostat Electronic Control Electronic Control
Protection Device — Inner Protector
Capillary Tube Length mm — Cooling; 1,180, Heating; 1,048
Flow Rate l/min — Cooling; 8.7, Heating; 14.0
Inner Diameter mm — Cooling; 1.5, Heating; 1.8
Air Filter Material
Style
P.P.
Honeycomb
—
Capacity Control Capillary Tube
Compressor Capacitor µF, VAC — 50 µF, 400VAC
Fan Motor Capacitor µF, VAC — 2.0 µF, 450VAC
Note:
•
Specifications are subject to change without notice for further improvement.
7
CS-PW18DKE CU-PW18DKE
To Next Page
Loading...
Need help?
General
