CS-PW9DKE / CU-PW9DKE / CS-PW12DKE / CU-PW12DKE
Drain hose
Connecting cable
Adjust the piping slightly downwards.
Piping
Drain
hose
Slee ve for
piping hole
Connecting cable
More than approx. 95 cm
Installthe IndoorUnit
Hook the indoor unit onto the
upper portion of installation plate
(Engage the indoor unit with the
upper edge of the installation
plate). Ensure the hooks are
properly seated on the installation
plate by moving in left and right.
Hooks at
installation
plate
Slee ve for
piping hole
Piping
Drain hose
Indoor unit
Installation
plate
hook
Unit's
Securethe IndoorUnit
1. Tape the extra power supply cord in a
bundle and keep it behind the chassis .
Ensure t hat the p ower s upply cord is
not clamped in between the unit's hook
(2 positions) and installation plate.
2. Press the lower left and right side of the
unit against the installation plate until
hooks engages with their slots
(sound click).
To Next Page
Loading...
