48
11.9 Indication Panel
LED POWER TIMER QUIET POWERFUL e-ion
ECO
PATROL
PATROL
Color Green Orange Orange Orange Blue Green Blue Orange Red
Light ON Operation ON Timer Setting ON Quiet Mode ON Powerful Mode ON e-ion ON
Eco Patrol
ON
Air Clean Moderate Dirty
Light OFF Operation OFF Timer Setting OFF Quiet Mode OFF Powerful Mode OFF e-ion OFF
Eco Patrol
OFF
PATROL OFF
Note:
• If POWER LED blinks, the possible operation of the unit is operation mode judgment, or ON timer sampling.
• If TIMER LED blinks, there is an abnormal operation occurs.
• If e-ion LED blinks, there is an abnormal e-ion operation occurs.
• If PATROL LED blinks, there is gas sensor error detection.
11.10 Patrol Operation
• To monitor air dirtiness level by using Patrol sensor and to maintain air freshness by activates e-ion operation
• Patrol operation starts condition
o When the unit operation is started with “OFF/ON” button
o When the unit stops, “Patrol” button is pressed, Patrol individual operation will start.
o During cooling only operation, “Patrol” operation is selected.
• Patrol operation stops condition (when any of the following condition is fulfilled):
o When “OFF/ON” button is selected.
o During any operation with Patrol, “PATROL/e-ion” button is pressed.
o When OFF Timer activates.
• To disable the Patrol Operation during unit starts (default) with “OFF/ON” button
o Press “Set” button continuously for 15 seconds by using pointer during Air Conditioner is OFF condition to
enter internal setting mode.
o Press “Timer Decrement" button to select “Pt dFLt”.
o Press “Timer Set” button to toggle Patrol operation default OFF/ON.
Long “beep”: Turn OFF Patrol operation default.
Short “beep”: Turn ON Patrol operation default.
To Next Page
Loading...
